How do I add M.2 SSD into my Nightsky RX17? Aug 14, 2019 PDF Document
How do I add M.2 SSD into my Nightsky RX17
The "PDF Document" link above is a small instruction manual that takes you step by step on how to add or change the M.2 drive in your Nightsky RX17
|
How do I remove and replace the battery on my Nightsky RX17? Aug 14, 2019 PDF Document
How do I remove and replace the battery on my Nightsky RX17?
Select the "PDF Document" link above and you will download a small manual. Page one shows how to remove and replace the battery on your notebook
|
How do I reset CMOS battery in my Nightsky RX17? Aug 14, 2019 PDF Document
How do I reset CMOS battery in my Nightsky RX17?
Occasionally you may need to reset the CMOS battery in your Nightsky RX17. This process is quite simple. Above is a link labeled "PDF Document" Select this link and follow the instructions on how to remove your keyboard. On page two of this document you can see the CMOS battery in diagram B. It is the circular battery under the red 7 & 8 highlight. You simply remove the battery then turn your notebook over and hold the power button down for 60 seconds. This will reset the CMOS in your notebook.
|
How to access RAM slots to upgrade the RAM on my Nightsky RX17? Aug 14, 2019 PDF Document
How to access RAM slots to upgrade the RAM on my Nightsky RX17?
The "PDF Document" link above is a small instruction manual that takes you step by step on how to add or change the RAM in your Nightsky RX17.
|
How to replace the Keyboard on my Eurocom Nightsky RX17? Aug 14, 2019 PDF Document
How to replace the Keyboard on my Eurocom Nightsky RX17?
Download a step by step instruction guide on how to remove and replace your keyboard by selecting the "PDF Document" link above.
|
Can I disable G-Sync temporarily on my Eurocom Notebook? Jun 15, 2017
If your notebook is configured with G-Sync you may encounter some older video games that do not support G-Sync. To play these games you simply temporarily disable G-Sync using the following method...
1. Right click anywhere on the Desktop 2. Open the NVidia Control Panel 3. On the left side of the screen select - Setup G-Sync 4. De-select Enable G-Sync
|
Can I disable the Touchpad on my Eurocom notebook? Jun 16, 2017
If you like you can disable the Touch pad on your Eurocom Notebook. Simply select FN-F1 and it will toggle the Touch pad off and on.
|
Can I upgrade my system to use NVidia G-Sync? Jun 11, 2015
Unfortunately No. In order for a notebook to use NVidia G-Sync it must come from the factory with G-Sync enabled. Part of the requirements are as following...
1) Supported GPU 2) Supported LCD Panel 3) NVidia GPU Driver R352.06 or above 4) Eurocom G-BIOS
What is G-Sync?
G-Sync is a proprietary adaptive sync technology created by NVidia to eliminate screen tearing and the need for software deterrents such as Vsync. G-Sync eliminates screen tearing by forcing a video display to adapt to the frame rate of the outputting device rather than the other way around, which could traditionally be refreshed halfway through the process of a frame being output by the device, resulting in two frames being shown at once. In order for a device to use G-Sync, it must contain a proprietary G-Sync module sold by NVidia.
|
Can I use an M.2 Drive as my primary hard drive or do I need a standard Hard drive installed? Jan 14, 2016
If your notebook is equipped with an M.2 Hard Drive you can use it alone and as the primary drive in your notebook. There are no restriction on how it can be used.
Thanks
|
How do I activate the TPM Module in my Eurocom notebook Jun 05, 2015 PDF Document
To learn how to activate the TPM module in your Eurocom Notebook please download the attached .PDF document.
|
How do I turn off the Adaptive Screen Brightness? Apr 26, 2023
1.Go to Control Panel > Hardware and Sound > Power Options, then click on "Change plan settings" next to your active power plan.
2.Click on "Change advanced power settings."
3.Scroll down to Display, then under Enable adaptive brightness, switch it off for both the battery and plugged in modes.
Thank You
|
How do I turn off the Driver Auto Updates for Windows 10? They keep updating drivers I do not want updated Jun 15, 2017
Occasionally Microsoft will use their Auto Update feature in Windows 10 and will send out new drivers to your notebook. Generally this is fine however sometimes you do not want drivers such as your Video Card drivers updated as the newest drivers will not work properly in your notebook. To turn off these driver updates please follow this easy procedure...
1. Click Start, right-click Computer, and then click Properties. 2. In the Tasks list, click Advanced System Settings. 3. On the System Properties dialog box, click the Hardware tab, and then click Windows Update Driver Settings. 4. Select Never check for drivers when I connect a device. 5. Click OK twice, and then close the System dialog box.
|
How do I update / flash my EUROCOM laptop with a new BIOS? Aug 13, 2015
In order to get some of new GPUs working in your system you may require to update the BIOS. Please contact our Support Team to get updated version of BIOS Support Request Form
|
Is it possible to turn the system fans on Full Speed to ensure my laptop remains cool? Jun 15, 2017
During normal use the fans will increase speed on their own as heat builds however, many users like to prevent the temps in their notebook from building so they toggle the fans to full speed before stressing the notebook.
If you are just sitting down to intense gaming or starting some heavy workload on your notebook and you want to turn your fans on full speed to keep things nice and cool, simply use the keystroke FN-1 and this will toggle the fans to full speed. Toggle the FN-1 again and the fans will return to their normal speed as you choose.
On the Eurocom Tornado notebook there is a Fan button on the top case that will throttle the fans to full speed and back to normal as it is pushed. This is the only model Eurocom notebook that does not use the FN-1 selection to control fan speed.
|
The Two Finger Scroll Gesture Is not working on my Windows 10 Laptop Oct 01, 2021
I am trying to use Two Fingered Scroll on my Laptop at is running Windows 10. How do I fix this?
Here is a link that will allow you to check your settings to ensure the gesture called Two Fingers Scrolling is enabled in Windows 10.
https://www.makeuseof.com/tag/easily-activate-finger-scroll-windows-laptops/
|
Where do I find drivers for my new VGA/GPU card? Jun 05, 2015
The drivers for all Video Cards are available in our Product Showroom. On the Orange Options Menu you will see a series of links. Please choose Drivers and you will be taken to the proper drivers for your notebook.
|
Who do I contact to get some help with my laptop upgrades? Jun 15, 2015
If you have any questions or would like some assistance with your upgrade, please fill in this Support Request Form and our Support team would be happy to assist you!
Support Request Form
|